Custom sheet punching
In-house production on a CNC TRUMPF TC 500 R punch press, large stock of perforated sheet and technical materials, custom work including small quantities. Working size up to 1500 × 3000 mm — with repositioning, sheets up to 6000 mm long, thickness up to 8 mm*.
Request a quote for sheet punching Send drawing / DXF See perforated sheet in stock →Manufacturer
Not just a distributor — we punch in our own workshop, on our own machine.
Large stock
Standard perforated sheet and technical materials, available immediately.
Variety
Varied materials, thicknesses and perforations, adapted to your project.
Small quantities
Custom work from a single sheet up to industrial runs.
Technical consulting
We help you choose the right solution before ordering.
CNC Punch Press TRUMPF TC 500 R
Punching and nibbling machining center with a rotating head — tools work in any geometry and at any angle.
*Maximum thickness depends on the material, perforation type, geometry and available tool. Confirmation is made after technical analysis.
Main services
We work from your drawing — from prototype to production run — with CAD/CAM programming and material usage optimization.
Custom sheet punching
Round, square, rectangular, oblong and special-shaped holes, in straight or staggered grids or free positions per drawing.
Contour cutting (nibbling)
Free-form exterior and interior contours — cutouts, windows, masks — directly from flat sheet.
Perforated panels
Panels at the exact project dimensions, with solid margins for frames, hemming or welding.
Screens, guards, grilles, ventilation
Screens and sieves, gratings, machine guards, grilles and ventilation panels for utility use.
Parts from drawing / DXF
We work directly from DXF / DWG or a dimensioned sketch. CAD/CAM programming with nesting for minimal material use.
Small runs and prototypes
Up to 900 strokes per minute and automatic tool change — efficient for a single piece and for series.
Evaluated on request
Ventilation louvres
Formed slots that allow airflow without open holes — for electrical enclosures, HVAC and equipment guards.
Stiffening ribs
Ribs programmable to any length, increasing panel rigidity without extra material — larger, thinner, cheaper panels.
Formed embosses and countersinks
Stand-offs, screw seats, recesses and embossed logos — directly at punching, with no secondary operations.
Collar extrusions
Raised collar around the hole — for threading in thin sheet, pipe support or airflow.
Threading M3 – M8
Thread formed directly in the sheet — eliminates nuts, rivets and extra assembly operations.
Half shears
Buttons partially pressed from the sheet — locating features for spot welding and precise assembly.
Illustrations: TRUMPF Style tool catalog (Wilson Tool) — used in the mockup for illustration; to be replaced with own photos at publication.
Common perforations
The most requested geometries — and any other shape per your drawing.
Materials we process
Flat metal sheets, cold- or hot-rolled — from our stock or from material you supply.
| Material | Typical thickness | Typical applications |
|---|---|---|
| Carbon steel (black / pickled) | 0.5 – 8 mm* | Utility and industrial applications |
| Galvanized steel | 0.5 – 3 mm | Corrosion protection without further painting |
| Stainless steel | 0.5 – 4 mm | Food industry, outdoor, corrosive environments |
| Aluminium | 0.5 – 8 mm* | Facades, cladding, lightweight applications |
| Copper / brass | 0.5 – 3 mm | Decorative and electrotechnical applications |
*Maximum punchable thickness depends on the material, the minimum hole diameter (rule of thumb: diameter ≥ sheet thickness) and the available tool. We confirm feasibility after technical analysis.
Who we work for
From metal fabricators to architecture projects — we deliver perforated sheet exactly to the project drawing.
Metal fabrication
Perforated blanks ready for bending or welding: enclosures, masks, panels, brackets. Reduce operations in your workshop.
Architects and developers
Ventilated facades, cladding, parapets, ceilings and decorative panels — custom perforations, with solid zones where the design requires.
Fences, gates, balconies
Perforated panels for fences, gates and railings: privacy, ventilation and a modern look, at exact dimensions.
Industrial applications
Screens and sieves, gratings, machine guards, ventilation masks, anti-slip treads — precise execution, utility role.
From drawing to delivery
Send your request
DXF / DWG file, PDF or a dimensioned sketch, plus the material and quantity needed.
Receive the quote
We analyze feasibility, optimize material usage and respond quickly with price and lead time.
CNC production
We program and punch on the TRUMPF TC 500 R, with dimensional checking.
Delivery
Pick up from our site in Mogoșoaia or we deliver anywhere in the country.
FAQ — Custom sheet punching
What maximum sheet dimensions can you punch?
The working size is 1500 × 3000 mm. With automatic repositioning we can process sheets up to 6000 mm long.
Can I order a single sheet?
Yes. We produce from a single piece — prototypes and small quantities — up to industrial runs.
In what format do I send the drawing?
Ideally DXF or DWG. We also accept PDF or a dimensioned sketch — our team converts it into a CNC program.
What maximum thickness can you punch?
Up to 8 mm, depending on material, geometry, tool and technical feasibility. Exact confirmation after reviewing the drawing.
Can I bring my own material?
Yes. We punch both from our material stock and from sheet you supply, if it is compatible with the machine.
Do you make holes that aren't round?
Yes — square, rectangular, oblong and special shapes, in any layout the project requires.
Have a punching project?
Send us your drawing and quantity — get a quote quickly, with technical consulting included.
Request a quote for sheet punching Send drawing / DXFSee perforated sheet in stock →